| Brand Name: | HENGA | |||
| Color: | NATURE | |||
| Model Number: | HG-PA66-FR001 | |||
| Certificates: | REACH, ROHS, TS16949 | |||
| Features | Flame Retardant | |||
| Delivery time: | 3-5days | |||
| Physical | Dry | Conditioned | Unit | Test Method |
| Density | 1.35 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage 3 | ISO 294-4 | |||
| Across Flow | 1.3 | -- | % | |
| Flow | 1.1 | -- | % | |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C, 2.00 mm | 6.5 | -- | % | |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 1.5 | -- | % | |
| Mechanical | Dry | Conditioned | Unit | Test Method |
| Tensile Modulus | 3600 | -- | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Yield) | 70 | -- | MPa | ISO 527-2/1A/50 |
| Nominal Tensile Strain at Break | 7 | -- | % | ISO 527-2/1A/50 |
| Flexural Modulus 4 | 3250 | -- | MPa | ISO 178 |
| Flexural Stress 4 | 115 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
| Charpy Notched Impact Strength (23°C) | 5 | -- | kJ/m² | ISO 179/1eA |
| Thermal | Dry | Conditioned | Unit | Test Method |
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 180 | -- | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed | 85 | -- | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 205 | -- | °C | ISO 306/B50 |
| Melting Temperature 5 | 260 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Unit | Test Method |
| Surface Resistivity 6 | 1.00E+12 | 1.00E+10 | ohms | IEC 60093 |
| Volume Resistivity 6 | 1.00E+15 | 1.00E+13 | ohms·cm | IEC 60093 |
| Flammability | Dry | Conditioned | Unit | Test Method |
| Burning Rate (3.00 mm) | 0 | -- | mm/min | ISO 3795 |
| Flame Rating (0.8 mm) | V-0 | -- | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 1.0 mm | 960 | -- | °C | |
| 2.0 mm | 960 | -- | °C | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 1.0 mm | > 775 | -- | °C | |
| 2.0 mm | > 775 | -- | °C | |
| Injection | Dry | Unit | ||
| Drying Temperature - Desiccant Dryer | 80 | °C | ||
| Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | ||
| Dew Point - Desiccant Dryer | < -20 | °C | ||
| Suggested Max Moisture | 0.1 | % | ||
| Processing (Melt) Temp | 270 to 290 | °C | ||
| Mold Temperature | 60 to 80 | °C | ||
| Injection Rate | Moderate |
PA66 Flame retardant
.jpg)